Plastic Shrinkage Shares
Plastic Shrinkage Shares

BS: Outer casing assembly in kitchenware, with visual images. Chrome plating on it. Normal stove temperature should be kept high for it to come out bright. 220… 240 C 0.005 - 0.008

ACRYLIC: Transparent materials, to reflect electricity in signals and transparent materials, leds etc. 220 ... 235 C 0.006 - 0.008

INSTRUMENTS: Same as I- Intermediate parameters in mounting flats, cable tie, terminal etc. 170 C 0.020

ANTISOT: Parts working in the mechanism. Mounting plate parameters. It can be chrome plated 190… 200 0.006

DELRIN: Threaded parameter.alar and slides. 190… 200 0.015 - 0.030

20% GLASS FIBER 240… 260 0.018 - 0.050 in electrical materials and rubber water records

30% GLASS FIBER Electric materials and rubber water records 240… 260 Freezing rate is much higher compared to other plastics. It eats the machine's furnace. It eats the injection auger shaft over time. The hearth hot work steel that should be ... 54 HRC hardness 0.008 - 0.032

50% GLASS FIBER Electric materials and rubber water records 0.010 - 0.033

43% GLASS FIBER In electrical materials and rubber water records. As the fiber increases, the resistance increases. 0.013 - 0.027

ELTEKS: Unbreakable, flake. Intermediate parameters, cable tie, Alketen and Elteks can be mixed for hardness. 0.020

HOSTAFORM: It does not smell like Delrin. It does not smell during printing. 0.013 - 0.032

HOSTALEN: 0.020 - 0.035

HOSTRYEN: 0.004 - 0.006

Same features as I-20 Elteks. 0.020

ISN (ASEEN): Glass wedge materials, signal lamps, reflectors, glass parts can be painted. 0.004 - 0.006

KRISTAL: Suitable for food regulations, fork, crotch, bottle, lid, plate, etc. Can join ANTISOT to give 20% hardness 0.006

LEXAN (POLYCARBONAT): Electricity is also used. High resistance, unbreakable. It can also be used in street lights, sockets in carcasses. 0.004 - 0.007

Lexan r500: It gives 10% Fiber Stiffness and has resistance against electricity. It is used in electrical boxes in high voltage switches. 0.006… 0.009

LUPOLEN: 0.020-

MOBLEN: A versatile material. Normal with talc. Table. In chair, shoe parts, outer cases. 0.030 0.014 - 0.050

NITRUL ACETATE: It is suitable for food salt. Example on toothbrush handles. 0.002 - 0.004

NORYL: 290 degrees melting. Small sockets inside the computer. With or without fibers. GE is doing it. It is an expensive material. The usage rate is low. In sockets and very delicate parts. 0.005 - 0.007

POLYAMID 6: melting at 250 degrees. Also in spacers. It is also used as a gear. On sleds. 0.005 - 0.022

POLYAMID 66: In meat materials. One on one to the collapse. A little more resistant than 6. 0.008 - 0.025

POLYAMID 11: no shrinkage… Gear manufacturing and textile parts. In risky parts. 0.010 - 0.022 (0.002 ... 0.004)

POLYSTROLPOLYPROPILEN: Talc of polypropylene. Hard. 0.004 - 0.0060.014 - 0.025

PVS: According to Shore Shore hardness values ​​.. It is used in bellows. There are 52 types. There are also those who do not comply with the food regulations. 0.020 - 0.030

STREN (POLYSTREN): 0.008

CELLULOSE ACETATE: 0.001 - 0.003

VESTOLEN: Resistant to abrasion. Base elastonel on the market. Intermediate flakes in textile machines, car stoppers, gasoline filters. 0.015 - 0.020

VESTRYON: 0.004 - 0.006

SANTRAFON: It is a material that is not affected by weather conditions, it does not wear and tear. It is used as an intermediate gasket. It is used in electrical material. Another type of PVS. It makes great rust during printing. Shore Shore hardness is hardness. 0.024

Valoks: Both fibrous and normal. It is used in electrical materials. It is resistant to high temperatures to a certain extent. It is used in small storage boxes. It can burn immediately during printing (fragile… loses its feature).
0.024